Communication Drivers

VisiWin is an open system not tying you to any specific panel. The same applies to communication with automation hardware such as control and drive systems.

In VisiWin, communication is uncoupled from the runtime system by means of a standardized OPC interface (Classic and/or UA) or proprietary drivers.

Of course, the drivers developed by INOSOFT are particularly well suited for the VisiWin runtime system and ensure optimal performance, stability and diagnostics.

You can combine VisiWin with various controllers and common automation devices. Even at the same time ... This makes you independent of single manufacturers, so that supply shortages, e.g. for HMI panels, can also be overcome.

Siemens S7

VisiWin driver for communication with Simatic S7 compatible controllers via TCP/IP

Includes a browser for importing variables from Simatic Manager and TIA Portal

Supported control systems:

S7-200(TCP)/S7-300/S7-400
S7-1200/S7-1500 access to non-optimized data blocks/markers/I/O
S7-1200/S7-1500 (symbolic access to optimized data blocks)
WinAC/WinAC RTX
Simatic S7-PLCSIM Advanced
VIPA System 300S (Speed7)
SAIA various PCD of the xx7 series (Siemens Step7 compatible)
Various TCP/IP<=>MPI converters by Process-Informatik/Hilscher/IBHSoftec
S5 90U/95U/100U/115U/135U via adaptor TCP/IP (RFC1006) based on PG protocol AS511 (TTY)

CoDeSys V2

VisiWin driver for communication with CoDeSys V2 compatible controllers via TCP/IP

(ARTI/L2Route/L4)

Supported control systems (a few examples):

Bosch Rexroth IndraMotion MLC L20, L40, L60, IndraLogic CML20/40
Lenze Logic and Motion
3S CoDeSys runtime SP WIN V2.3/SP WIN RTE V2.3

CoDeSys V3

VisiWin driver for communication with CoDeSys V3 compatible controllers via PLCHandler and gateway

Supported control systems (a few examples):

Bosch Rexroth IndraMotion MLC L25, L45, L65, IndraLogic, IndraLogic10
Lenze Logic and Motion V3
Schneider/Elau PacDrive3 LMC x00C/LMC x01C (SoMachine)
3S CoDeSys runtime systems SP WIN V3/SP WIN RTE V3

Beckhoff ADS

VisiWin driver for communication with TwinCAT V2 and V3 via ADS

Supported control systems:

TwinCAT PLC runtime systems under Windows Standard or Windows CE
Intelligent controllers of the BXxxxx/CXxxxx series
TwinCat I/O

Allen-Bradley (CIP)

VisiWin driver for communication via TCP/IP

(Common Industrial Protocol/CIP)

Supported control systems:

Allen-Bradley CompactLogix and ControlLogix

B&R PVI

VisiWin driver for communication with B&R control systems via PVI

Supported control systems:

B&R X20 System, System 2003, System2005, Power Panel

Modbus

VisiWin driver for communication with various control systems via a serial interface (MODBUS ASCII or RTU) or TCP/IP (MODBUSoverIP)

Supported control systems:

Wago Ethernet controller of the 750 series with Modbus Over IP functionality, e. g. 750-880, 750-881, etc.
Phoenix Contact Modbus/TCP bus coupler
Schneider Modicon series (Quantum *, Premium *), Logic Controller Modicon M*, Modicon TSX Micro
SAIA PCD controllers
And many more

Jetter

Connection to various controllers manufactured by Jetter AG, e. g. of the JetControl series.

The following communication interfaces are supported:

JETSTX
JETWay
PCPPLC
JETIP

Bachmann

Connection to various controllers manufactured by Bachmann, e. g. processor modules of the MX200 series.

The following communication protocols are supported:

TCP
QSOAP
SSL
UDP

OPC DA AND OPC UA

A client for OPC DA and OPC UA connectivity to the latest standard is arbitrarily included in the system and does not need to be additionally licensed.

YOU COULD NOT FIND YOUR SYSTEM?

Even linking to a proprietary system is possible. To develop an individual driver a driver toolkit is available that allows you to sinply develop your own driver in C# based on Microsoft.NET. Of course we can do that for you, too.